Hitachi NT65MA2 Angled Nail Gun
When doing carpentry jobs, such as building cupboards of cabinets, it is very often the finishing details that seem to take the longest to complete the job. When doing finishes to a wood project, it is important to make sure that that everything is as straight and true as it can be. this is time consuming, especially if you are doing all your nailing by hand. Just one missed strike from a hammer can damage your finish, and make the best job look amateur. What’s more, working with nails and hammers overhead, is difficult and tiring. that is why so may DIY-ers and contractors use specialized nail guns. The Hitachi NT65MA2 Angled Nail Gun is used for finishes and has all the features you need for that kind of work.
Working in tight corners, or at an upward angle, is no problem when you use the Hitachi NT65MA2 Angled Nail Gun for fastening finish components. It is lightweight, at only 4.2 pounds and the magazine is at a 34° angle, so it doesn’t get in the way of your nailing work. The magazine is made of a nylon composite, so it is lightweight, strong, and does not cut into your fingers while you hold the nail gun. Because the Hitachi NT65MA2 is pneumatic, there is shortage of power and you can work for extended periods of time. As with all pneumatic or gas-cylinder powered nail guns, the exhaust angle and position is a potential problem: you don’t want those gases blowing against your face or body while you work. With the Hitachi NT65MA2, this is not an issue, since the exhaust has 360° positioning, without needing a tool for adjustment. Nail depth is an important factor finishing carpentry work. The Hitachi nail Gun allows for tool-less nail depth adjustment. The pressure that the nail get shot with, can also be dialed in, ranging from 70 to 120 PSI. Another convenient feature, is the dust blower: use your thumb to operate a button that blasts pressurized air to clear your work piece of sawdust and dirt.
We have found the best price for the Hitachi NT65MA2 Angled Nail Gun at Amazon – click here to check it out.
Hitachi NT65MA2 Angled Nail Gun Features and Specifications
- Finish Nail Gun, pneumatic power, with 70 to 120 PSI operating pressure
- Nylon composite magazine at a 34° angle.
- Magazine holds 100 nails
- Dual firing mode: trigger activated, or pressure activated
- Built-in dust blower
- Adjustable exhaust angle
- Blockages can be cleared quickly, without tools
- Lightweight construction, at 4.2 pounds
- Compact design, accesses corners easily: length 13.5″, height 12″, width 2.5″
- ¼” air inlet
- Uses 15-gauge nails, with length between 1 ¼” and 2 ½”.
- Five-year limited warranty
Hitachi NT65MA2 Angled Nail Gun Reviews
One customer owns a number of nail guns, all different makes. He wrote that the Hitachi is the best of the Finish Nail Guns he has ever owned. He said that it has minimal recoil when fired, and is the most reliable of the 15-gauge nailers he has used.
Another man has had his Hitachi NT65MA2 for a few months, and has not experienced problems or hassles with it. He really likes the dust blower feature, which is something that is lacking in other makes of nail gun.
We have found the best price for the Hitachi NT65MA2 Angled Nail Gun at Amazon – click here to check it out.
